Blog

By Benedict Smythe

Do it yourself projects are efficient ways to minimize cost, and to a certain degree, tap into your creative side. Home improvement is just one area in the wide and complex world of Do- it- Yourself.

In a way, home improvement should be done by the homeowners themselves, because the property is theirs, and if something succeeds or fails, the homeowners take full accountability for what happens. How does one begin a do it yourself project? The following is a step by step guide in determining your general path for future DIY projects.

1.

Examine your house- a house that has stood against the elements of nature for at least three years probably has suffered some form of damage. When was the last time that you stopped to inspect whether your house is still safe to live in, or if there is something that you can still do to improve it?

A thorough evaluation of your house and all its parts would definitely give you great ideas for your future DIY project. With you some paper and a pen, list down everything that you think must be repaired, replaced, improved or taken down completely. Be critical of how furniture and electrical wires are placed in your house.

After making your list, start sifting through them. What is it that interests you at the moment? Do you wish to make a new gate made purely of wood, and coated with varnish? Do you think that old door needs sprucing up? Whatever you might choose to do, remember that you have to take into consideration time and budget constraints.

2.

Plan first, and plan well- do not commit the mistake of not being able to plan before you try your hand in DIY home improvement. Any project, executed without a clear plan in mind is bound to either fail or finish unsuccessfully.

How does one begin a work plan for a DIY project? First identify what needs to be done. Make a list of the things that have to be done prior to the DIY project. Then proceed to make a list of the things that you need to do. This includes even the smallest of implements in the DIY project, like nails and paint.

After determining the materials needed for the DIY project, begin to compute how much all this would cost. A good and reliable computation should not be based on estimates alone. If you can, make the computation when you’re at the hardware store.

If something seems to be too expensive, then try to find an alternative brand, or if it’s not possible to do this, try to find an alternative, material to replace that which you cannot acquire due to cost, a good example will be thinner gauge plywood for sidings and non load bearing structures.

3.

Timeframe- never forget to make a timeframe for a particular DIY project. Failure to do so might mean the project might take too long to finish, or in some instances, it might not be completed at all. A timeframe would tell you what to do and what to complete in a day.

About the Author: The author of this article was Benedict Yossarian. For home improvements Benedict recommends Dekorbeton

Decorative Concrete

as a cheap alternative to expensive bricks and Roof Bond Spray

Foam Roof Insulation

to reduce your heating costs.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=319998&ca=Home+Management